{{ ansible_managed | comment }}
# This is a configuration file for Zabbix agent 2 (Unix)
# To get more information about Zabbix, visit http://www.zabbix.com

############ GENERAL PARAMETERS #################

### Option: PidFile
#	Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_agent2.pid
{% if agent_param_pidfile is defined and agent_param_pidfile %}

PidFile={{ agent_param_pidfile }}
{% endif %}

### Option: LogType
#	Specifies where log messages are written to:
#		system  - syslog
#		file    - file specified with LogFile parameter
#		console - standard output
#
# Mandatory: no
# Default:
# LogType=file
{% if agent_param_logtype is defined and agent_param_logtype %}

LogType={{ agent_param_logtype }}
{% endif %}

### Option: LogFile
#	Log file name for LogType 'file' parameter.
#
# Mandatory: yes, if LogType is set to file, otherwise no
# Default:
# LogFile=/tmp/zabbix_agent2.log
{% if agent_param_logfile is defined and agent_param_logfile %}

LogFile={{ agent_param_logfile }}
{% endif %}

### Option: LogFileSize
#	Maximum size of log file in MB.
#	0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1
{% if agent_param_logfilesize is defined and (agent_param_logfilesize or agent_param_logfilesize is number) %}

LogFileSize={{ agent_param_logfilesize }}
{% endif %}

### Option: DebugLevel
#	Specifies debug level:
#	0 - basic information about starting and stopping of Zabbix processes
#	1 - critical information
#	2 - error information
#	3 - warnings
#	4 - for debugging (produces lots of information)
#	5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
# DebugLevel=3
{% if agent_param_debuglevel is defined and (agent_param_debuglevel or agent_param_debuglevel is number) %}

DebugLevel={{ agent_param_debuglevel }}
{% endif %}

### Option: SourceIP
#	Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=
{% if agent_param_sourceip is defined and agent_param_sourceip %}

SourceIP={{ agent_param_sourceip }}
{% endif %}

##### Passive checks related

### Option: Server
#	List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of Zabbix servers and Zabbix proxies.
#	Incoming connections will be accepted only from the hosts listed here.
#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally
#	and '::/0' will allow any IPv4 or IPv6 address.
#	'0.0.0.0/0' can be used to allow any IPv4 address.
#	Example: Server=127.0.0.1,192.168.1.0/24,::1,2001:db8::/32,zabbix.example.com
#
# Mandatory: yes, if StartAgents is not explicitly set to 0
# Default:
# Server=
{% if agent_param_server is defined and agent_param_server is iterable and agent_param_server is not string and agent_param_server is not mapping %}

Server={{ agent_param_server | join(',') }}
{% elif agent_param_server is defined and agent_param_server and agent_param_server is string %}

Server={{ agent_param_server }}
{% endif %}

### Option: ListenPort
#	Agent will listen on this port for connections from the server.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# ListenPort=10050
{% if agent_param_listenport is defined and (agent_param_listenport or agent_param_listenport is number) %}

ListenPort={{ agent_param_listenport }}
{% endif %}

### Option: ListenIP
#	List of comma delimited IP addresses that the agent should listen on.
#	First IP address is sent to Zabbix server if connecting to it to retrieve list of active checks.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0
{% if agent_param_listenip is defined and agent_param_listenip is iterable and agent_param_listenip is not string and agent_param_listenip is not mapping %}

ListenIP={{ agent_param_listenip | join(',') }}
{% elif agent_param_listenip is defined and agent_param_listenip and agent_param_listenip is string %}

ListenIP={{ agent_param_listenip }}
{% endif %}

### Option: StatusPort
#	Agent will listen on this port for HTTP status requests.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# StatusPort=
{% if agent_param_statusport is defined and (agent_param_statusport or agent_param_statusport is number) %}

StatusPort={{ agent_param_statusport }}
{% endif %}

##### Active checks related

### Option: ServerActive
#	Zabbix server/proxy address or cluster configuration to get active checks from.
#	Server/proxy address is IP address or DNS name and optional port separated by colon.
#	Cluster configuration is one or more server addresses separated by semicolon.
#	Multiple Zabbix servers/clusters and Zabbix proxies can be specified, separated by comma.
#	More than one Zabbix proxy should not be specified from each Zabbix server/cluster.
#	If Zabbix proxy is specified then Zabbix server/cluster for that proxy should not be specified.
#	Multiple comma-delimited addresses can be provided to use several independent Zabbix servers in parallel. Spaces are allowed.
#	If port is not specified, default port is used.
#	IPv6 addresses must be enclosed in square brackets if port for that host is specified.
#	If port is not specified, square brackets for IPv6 addresses are optional.
#	If this parameter is not specified, active checks are disabled.
#	Example for Zabbix proxy:
#		ServerActive=127.0.0.1:10051
#	Example for multiple servers:
#		ServerActive=127.0.0.1:20051,zabbix.domain,[::1]:30051,::1,[12fc::1]
#	Example for high availability:
#		ServerActive=zabbix.cluster.node1;zabbix.cluster.node2:20051;zabbix.cluster.node3
#	Example for high availability with two clusters and one server:
#		ServerActive=zabbix.cluster.node1;zabbix.cluster.node2:20051,zabbix.cluster2.node1;zabbix.cluster2.node2,zabbix.domain
#
# Mandatory: no
# Default:
# ServerActive=
{% if agent_param_serveractive is defined and agent_param_serveractive is iterable and agent_param_serveractive is not string and agent_param_serveractive is not mapping %}

ServerActive={{ agent_param_serveractive | join(',') }}
{% elif agent_param_serveractive is defined and agent_param_serveractive and agent_param_serveractive is string %}

ServerActive={{ agent_param_serveractive }}
{% endif %}

### Option: Hostname
#	List of comma delimited unique, case sensitive hostnames.
#	Required for active checks and must match hostnames as configured on the server.
#	Value is acquired from HostnameItem if undefined.
#
# Mandatory: no
# Default:
# Hostname=
{% if agent_param_hostname is defined and agent_param_hostname %}

Hostname={{ agent_param_hostname }}
{% endif %}

### Option: HostnameItem
#	Item used for generating Hostname if it is undefined. Ignored if Hostname is defined.
#	Does not support UserParameters or aliases.
#
# Mandatory: no
# Default:
# HostnameItem=system.hostname
{% if agent_param_hostnameitem is defined and agent_param_hostnameitem %}

HostnameItem={{ agent_param_hostnameitem }}
{% endif %}

### Option: HostMetadata
#	Optional parameter that defines host metadata.
#	Host metadata is used at host auto-registration process.
#	An agent will issue an error and not start if the value is over limit of 2034 bytes.
#	If not defined, value will be acquired from HostMetadataItem.
#
# Mandatory: no
# Range: 0-2034 bytes
# Default:
# HostMetadata=
{% if agent_param_hostmetadata is defined and agent_param_hostmetadata is iterable and agent_param_hostmetadata is not string and agent_param_hostmetadata is not mapping %}

HostMetadata={{ agent_param_hostmetadata | join(',') }}
{% elif agent_param_hostmetadata is defined and agent_param_hostmetadata and agent_param_hostmetadata is string %}

HostMetadata={{ agent_param_hostmetadata }}
{% elif (agent_param_hostmetadata is not defined or not agent_param_hostmetadata) and group_names %}

HostMetadata={{ group_names | join(';') }}
{% endif %}

### Option: HostMetadataItem
#	Optional parameter that defines an item used for getting host metadata.
#	Host metadata is used at host auto-registration process.
#	During an auto-registration request an agent will log a warning message if
#	the value returned by specified item is over limit of 65535 characters.
#	This option is only used when HostMetadata is not defined.
#
# Mandatory: no
# Default:
# HostMetadataItem=
{% if agent_param_hostmetadataitem is defined and agent_param_hostmetadataitem %}

HostMetadataItem={{ agent_param_hostmetadataitem }}
{% endif %}

### Option: HostInterface
#	Optional parameter that defines host interface.
#	Host interface is used at host auto-registration process.
#	An agent will issue an error and not start if the value is over limit of 255 characters.
#	If not defined, value will be acquired from HostInterfaceItem.
#
# Mandatory: no
# Range: 0-255 characters
# Default:
# HostInterface=
{% if agent_param_hostinterface is defined and (agent_param_hostinterface or agent_param_hostinterface is number) %}

HostInterface={{ agent_param_hostinterface }}
{% endif %}

### Option: HostInterfaceItem
#	Optional parameter that defines an item used for getting host interface.
#	Host interface is used at host auto-registration process.
#	During an auto-registration request an agent will log a warning message if
#	the value returned by specified item is over limit of 255 characters.
#	This option is only used when HostInterface is not defined.
#
# Mandatory: no
# Default:
# HostInterfaceItem=
{% if agent_param_hostinterfaceitem is defined and agent_param_hostinterfaceitem %}

HostInterfaceItem={{ agent_param_hostinterfaceitem }}
{% endif %}

### Option: RefreshActiveChecks
#	How often list of active checks is refreshed, in seconds.
#
# Mandatory: no
# Range: 1-86400
# Default:
# RefreshActiveChecks=5
{% if agent_param_refreshactivechecks is defined and (agent_param_refreshactivechecks or agent_param_refreshactivechecks is number) %}

RefreshActiveChecks={{ agent_param_refreshactivechecks }}
{% endif %}

### Option: BufferSend
#	Do not keep data longer than N seconds in buffer.
#
# Mandatory: no
# Range: 1-3600
# Default:
# BufferSend=5
{% if agent_param_buffersend is defined and (agent_param_buffersend or agent_param_buffersend is number) %}

BufferSend={{ agent_param_buffersend }}
{% endif %}

### Option: BufferSize
#	Maximum number of values in a memory buffer. The agent will send
#	all collected data to Zabbix Server or Proxy if the buffer is full.
#	Option is not valid if EnablePersistentBuffer=1
#
# Mandatory: no
# Range: 2-65535
# Default:
# BufferSize=100
{% if agent_param_buffersize is defined and (agent_param_buffersize or agent_param_buffersize is number) %}

BufferSize={{ agent_param_buffersize }}
{% endif %}

### Option: EnablePersistentBuffer
#	Enable usage of local persistent storage for active items.
#	0 - disabled, in-memory buffer is used (default); 1 - use persistent buffer
# Mandatory: no
# Range: 0-1
# Default:
# EnablePersistentBuffer=0
{% if agent_param_enablepersistentbuffer is defined and (agent_param_enablepersistentbuffer or agent_param_enablepersistentbuffer is number) %}

EnablePersistentBuffer={{ agent_param_enablepersistentbuffer }}
{% endif %}

### Option: PersistentBufferPeriod
#	Zabbix Agent2 will keep data for this time period in case of no
#	connectivity with Zabbix server or proxy. Older data will be lost. Log data will be preserved.
#	Option is valid if EnablePersistentBuffer=1
#
# Mandatory: no
# Range: 1m-365d
# Default:
# PersistentBufferPeriod=1h
{% if agent_param_persistentbufferperiod is defined and (agent_param_persistentbufferperiod or agent_param_persistentbufferperiod is number) %}

PersistentBufferPeriod={{ agent_param_persistentbufferperiod }}
{% endif %}

### Option: PersistentBufferFile
#	Full filename. Zabbix Agent2 will keep SQLite database in this file.
#	Option is valid if EnablePersistentBuffer=1
#
# Mandatory: no
# Default:
# PersistentBufferFile=
{% if agent_param_persistentbufferfile is defined and agent_param_persistentbufferfile %}

PersistentBufferFile={{ agent_param_persistentbufferfile }}
{% endif %}

### Option: HeartbeatFrequency
#	Frequency of heartbeat messages in seconds.
#	Used for monitoring availability of active checks.
#	0 - heartbeat messages disabled.
#
# Mandatory: no
# Range: 0-3600
# Default: 60
# HeartbeatFrequency=
{% if agent_param_heartbeatfrequency is defined and (agent_param_heartbeatfrequency or agent_param_heartbeatfrequency is number) %}

HeartbeatFrequency={{ agent_param_heartbeatfrequency }}
{% endif %}

############ ADVANCED PARAMETERS #################

### Option: Alias
#	Sets an alias for an item key. It can be used to substitute long and complex item key with a smaller and simpler one.
#	Multiple Alias parameters may be present. Multiple parameters with the same Alias key are not allowed.
#	Different Alias keys may reference the same item key.
#	For example, to retrieve the ID of user 'zabbix':
#	Alias=zabbix.userid:vfs.file.regexp[/etc/passwd,^zabbix:.:([0-9]+),,,,\1]
#	Now shorthand key zabbix.userid may be used to retrieve data.
#	Aliases can be used in HostMetadataItem but not in HostnameItem parameters.
#
# Mandatory: no
# Range:
# Default:

### Option: Timeout
#	Spend no more than Timeout seconds on processing
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3
{% if agent_param_timeout is defined and (agent_param_timeout or agent_param_timeout is number) %}

Timeout={{ agent_param_timeout }}
{% endif %}

### Option: Include
#	You may include individual files or all files in a directory in the configuration file.
#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
# Include=
{% if agent_param_include is defined and agent_param_include is iterable and agent_param_include is not string and agent_param_include is not mapping %}

{% for unit in agent_param_include %}
Include={{ unit }}
{% endfor %}
{% elif agent_param_include is defined and agent_param_include and agent_param_include is string %}

Include={{ agent_param_include }}
{% endif %}

# Include=/usr/local/etc/zabbix_agent2.userparams.conf
# Include=/usr/local/etc/zabbix_agent2.conf.d/
# Include=/usr/local/etc/zabbix_agent2.conf.d/*.conf

### Option:PluginTimeout
#	Timeout for connections with external plugins.
#
# Mandatory: no
# Range: 1-30
# Default: <Global timeout>
# PluginTimeout=
{% if agent_param_plugintimeout is defined and (agent_param_plugintimeout or agent_param_plugintimeout is number) %}

PluginTimeout={{ agent_param_plugintimeout }}
{% endif %}

### Option:PluginSocket
#	Path to unix socket for external plugin communications.
#
# Mandatory: no
# Default:/tmp/agent.plugin.sock
# PluginSocket=
{% if agent_param_pluginsocket is defined and agent_param_pluginsocket %}

PluginSocket={{ agent_param_pluginsocket }}
{% endif %}

####### USER-DEFINED MONITORED PARAMETERS #######

### Option: UnsafeUserParameters
#	Allow all characters to be passed in arguments to user-defined parameters.
#	The following characters are not allowed:
#	\ ' " ` * ? [ ] { } ~ $ ! & ; ( ) < > | # @
#	Additionally, newline characters are not allowed.
#	0 - do not allow
#	1 - allow
#
# Mandatory: no
# Range: 0-1
# Default:
# UnsafeUserParameters=0
{% if agent_param_unsafeuserparameters is defined and (agent_param_unsafeuserparameters or agent_param_unsafeuserparameters is number) %}

UnsafeUserParameters={{ agent_param_unsafeuserparameters }}
{% endif %}

### Option: UserParameter
#	User-defined parameter to monitor. There can be several user-defined parameters.
#	Format: UserParameter=<key>,<shell command>
#	See 'zabbix_agentd' directory for examples.
#
# Mandatory: no
# Default:
# UserParameter=

### Option: UserParameterDir
#	Directory to execute UserParameter commands from. Only one entry is allowed.
#	When executing UserParameter commands the agent will change the working directory to the one
#	specified in the UserParameterDir option.
#	This way UserParameter commands can be specified using the relative ./ prefix.
#
# Mandatory: no
# Default:
# UserParameterDir=
{% if agent_param_userparameterdir is defined and agent_param_userparameterdir %}

UserParameterDir={{ agent_param_userparameterdir }}
{% endif %}

### Option: ControlSocket
#	The control socket, used to send runtime commands with '-R' option.
#
# Mandatory: no
# Default:
# ControlSocket=
{% if agent_param_controlsocket is defined and agent_param_controlsocket %}

ControlSocket={{ agent_param_controlsocket }}
{% endif %}

####### TLS-RELATED PARAMETERS #######

### Option: TLSConnect
#	How the agent should connect to server or proxy. Used for active checks.
#	Only one value can be specified:
#		unencrypted - connect without encryption
#		psk         - connect using TLS and a pre-shared key
#		cert        - connect using TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSConnect=unencrypted
{% if agent_param_tlsconnect is defined and agent_param_tlsconnect %}

TLSConnect={{ agent_param_tlsconnect }}
{% endif %}

### Option: TLSAccept
#	What incoming connections to accept.
#	Multiple values can be specified, separated by comma:
#		unencrypted - accept connections without encryption
#		psk         - accept connections secured with TLS and a pre-shared key
#		cert        - accept connections secured with TLS and a certificate
#
# Mandatory: yes, if TLS certificate or PSK parameters are defined (even for 'unencrypted' connection)
# Default:
# TLSAccept=unencrypted
{% if agent_param_tlsaccept is defined and agent_param_tlsaccept is iterable and agent_param_tlsaccept is not string and agent_param_tlsaccept is not mapping %}

TLSAccept={{ agent_param_tlsaccept | join(',') }}
{% elif agent_param_tlsaccept is defined and agent_param_tlsaccept and agent_param_tlsaccept is string %}

TLSAccept={{ agent_param_tlsaccept }}
{% endif %}

### Option: TLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificates for
#	peer certificate verification.
#
# Mandatory: no
# Default:
# TLSCAFile=
{% if agent_param_tlscafile is defined and agent_param_tlscafile
   and (agent_param_tlsaccept is defined and (agent_param_tlsaccept == "cert" or "cert" in agent_param_tlsaccept)
        or agent_param_tlsconnect == "cert") %}

TLSCAFile={{ agent_param_tlscafile }}
{% endif %}

### Option: TLSCRLFile
#	Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=
{% if agent_param_tlscrlfile is defined and agent_param_tlscrlfile
   and (agent_param_tlsaccept is defined and (agent_param_tlsaccept == "cert" or "cert" in agent_param_tlsaccept)
        or agent_param_tlsconnect == "cert") %}

TLSCRLFile={{ agent_param_tlscrlfile }}
{% endif %}

### Option: TLSServerCertIssuer
#		Allowed server certificate issuer.
#
# Mandatory: no
# Default:
# TLSServerCertIssuer=
{% if agent_param_tlsservercertissuer is defined and agent_param_tlsservercertissuer
   and (agent_param_tlsaccept is defined and (agent_param_tlsaccept == "cert" or "cert" in agent_param_tlsaccept)
        or agent_param_tlsconnect == "cert") %}

TLSServerCertIssuer={{ agent_param_tlsservercertissuer }}
{% endif %}

### Option: TLSServerCertSubject
#		Allowed server certificate subject.
#
# Mandatory: no
# Default:
# TLSServerCertSubject=
{% if agent_param_tlsservercertsubject is defined and agent_param_tlsservercertsubject
   and (agent_param_tlsaccept is defined and (agent_param_tlsaccept == "cert" or "cert" in agent_param_tlsaccept)
        or agent_param_tlsconnect == "cert") %}

TLSServerCertSubject={{ agent_param_tlsservercertsubject }}
{% endif %}

### Option: TLSCertFile
#	Full pathname of a file containing the agent certificate or certificate chain.
#
# Mandatory: no
# Default:
# TLSCertFile=
{% if agent_param_tlscertfile is defined and agent_param_tlscertfile
   and (agent_param_tlsaccept is defined and (agent_param_tlsaccept == "cert" or "cert" in agent_param_tlsaccept)
        or agent_param_tlsconnect == "cert") %}

TLSCertFile={{ agent_param_tlscertfile }}
{% endif %}

### Option: TLSKeyFile
#	Full pathname of a file containing the agent private key.
#
# Mandatory: no
# Default:
# TLSKeyFile=
{% if agent_param_tlskeyfile is defined and agent_param_tlskeyfile %}

TLSKeyFile={{ agent_param_tlskeyfile }}
{% endif %}

### Option: TLSPSKIdentity
#	Unique, case sensitive string used to identify the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKIdentity=
{% if agent_param_tlspskidentity is defined and agent_param_tlspskidentity
   and (agent_param_tlsaccept is defined and (agent_param_tlsaccept == "psk" or "psk" in agent_param_tlsaccept)
        or agent_param_tlsconnect == "psk") %}

TLSPSKIdentity={{ agent_param_tlspskidentity }}
{% endif %}

### Option: TLSPSKFile
#	Full pathname of a file containing the pre-shared key.
#
# Mandatory: no
# Default:
# TLSPSKFile=
{% if agent_param_tlspskfile is defined and agent_param_tlspskfile
   and (agent_param_tlsaccept is defined and (agent_param_tlsaccept == "psk" or "psk" in agent_param_tlsaccept)
        or agent_param_tlsconnect == "psk") %}

TLSPSKFile={{ agent_param_tlspskfile }}
{% endif %}

####### PLUGIN-SPECIFIC PARAMETERS #######

### Option: Plugins
#	A plugin can have one or more plugin specific configuration parameters in format:
#     Plugins.<PluginName>.<Parameter1>=<value1>
#     Plugins.<PluginName>.<Parameter2>=<value2>
#
# Mandatory: no
# Range:
# Default:

### Option: Plugins.Log.MaxLinesPerSecond
#	Maximum number of new lines the agent will send per second to Zabbix Server
#	or Proxy processing 'log' and 'logrt' active checks.
#	The provided value will be overridden by the parameter 'maxlines',
#	provided in 'log' or 'logrt' item keys.
#
# Mandatory: no
# Range: 1-1000
# Default:
# Plugins.Log.MaxLinesPerSecond=20
{% if agent_param_plugins_log_maxlinespersecond is defined and (agent_param_plugins_log_maxlinespersecond or agent_param_plugins_log_maxlinespersecond is number) %}

Plugins.Log.MaxLinesPerSecond={{ agent_param_plugins_log_maxlinespersecond }}
{% endif %}

### Option: AllowKey
#	Allow execution of item keys matching pattern.
#	Multiple keys matching rules may be defined in combination with DenyKey.
#	Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments.
#	Parameters are processed one by one according their appearance order.
#	If no AllowKey or DenyKey rules defined, all keys are allowed.
#
# Mandatory: no
{% if agent_param_allowkey is defined and agent_param_allowkey is iterable and agent_param_allowkey is not string and agent_param_allowkey is not mapping %}

{% for unit in agent_param_allowkey %}
AllowKey={{ unit }}
{% endfor %}
{% elif agent_param_allowkey is defined and agent_param_allowkey and agent_param_allowkey is string %}

AllowKey={{ agent_param_allowkey }}
{% endif %}

### Option: DenyKey
#	Deny execution of items keys matching pattern.
#	Multiple keys matching rules may be defined in combination with AllowKey.
#	Key pattern is wildcard expression, which support "*" character to match any number of any characters in certain position. It might be used in both key name and key arguments.
#	Parameters are processed one by one according their appearance order.
#	If no AllowKey or DenyKey rules defined, all keys are allowed.
#       Unless another system.run[*] rule is specified DenyKey=system.run[*] is added by default.
#
# Mandatory: no
# Default:
# DenyKey=system.run[*]
{% if agent_param_denykey is defined and agent_param_denykey is iterable and agent_param_denykey is not string and agent_param_denykey is not mapping %}

{% for unit in agent_param_denykey %}
DenyKey={{ unit }}
{% endfor %}
{% elif agent_param_denykey is defined and agent_param_denykey and agent_param_denykey is string %}

DenyKey={{ agent_param_denykey }}
{% endif %}

### Option: Plugins.SystemRun.LogRemoteCommands
#	Enable logging of executed shell commands as warnings.
#	0 - disabled
#	1 - enabled
#
# Mandatory: no
# Default:
# Plugins.SystemRun.LogRemoteCommands=0
{% if agent_param_plugins_systemrun_logremotecommands is defined and (agent_param_plugins_systemrun_logremotecommands or agent_param_plugins_systemrun_logremotecommands is number) %}

Plugins.SystemRun.LogRemoteCommands={{ agent_param_plugins_systemrun_logremotecommands }}
{% endif %}

### Option: ForceActiveChecksOnStart
#	Perform active checks immediately after restart for first received configuration.
#	Also available as per plugin configuration, example: Plugins.Uptime.System.ForceActiveChecksOnStart=1
#
# Mandatory: no
# Range: 0-1
# Default:
# ForceActiveChecksOnStart=0
{% if agent_param_forceactivechecksonstart is defined and (agent_param_forceactivechecksonstart or agent_param_forceactivechecksonstart is number) %}

ForceActiveChecksOnStart={{ agent_param_forceactivechecksonstart }}
{% endif %}

# Include configuration files for plugins
{% if agent_param_includeplugins is defined and agent_param_includeplugins is iterable and agent_param_includeplugins is not string and agent_param_includeplugins is not mapping %}

{% for unit in agent_param_includeplugins %}
Include={{ unit }}
{% endfor %}
{% elif agent_param_includeplugins is defined and agent_param_includeplugins and agent_param_includeplugins is string %}

Include={{ agent_param_includeplugins }}
{% endif %}